Bang & Olufsen BeoSound 5 Encore - User Guide - Manual (Page 16)

16
You can make a wireless connection to
your network automatically with WPS
(wi-fi protected setup) or you can make
the connection manually if your network
router does not have the WPS feature.
We assume that you have enabled the
DHCP service on your network.
Connect to a network automatically …
> Press the WPS button on your Network
Link router to activate the WPS feature.
> Use the pointer to highlight MODE on
your music system.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight NETWORK
SETTINGS.
> Turn the wheel to select WIRELESS – WPS
and press GO.
> Wait until the network name of your
router and the message ‘CONNECTED’
appear in the display on your music
system. Your music system is now
configured correctly on your network.
Connect to a network manually …
> Use the pointer to highlight MODE on
your music system.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight NETWORK
SETTINGS.
> Turn the wheel to select WIRELESS –
AUTO and press GO.
> Wait until a list of network routers is
shown.
> Select your network router and press
GO.* 1
> Enter the password to your wireless
network and press GO. Wait until the
network name of your router and the
message ‘CONNECTED’ appear in the
display on your music system. Your music
system is now configured correctly on
your network.
1 * If the name of your network router does
not appear in the list, the network router
may be configured not to show the SSID.
In this case select WIRELESS – MANUAL
instead of WIRELESS – AUTO, and use the
wheel to select country followed by GO.
Then use the wheel to enter the SSID,
network encryption type, and password to
the wireless network followed by GO after
each entered value. See the guide enclosed
with your network router for more
information.
For more information about your Network
Link router, see the guide enclosed with your
Network Link router.
Your music system supports wi-fi WLAN
802.11 a/n, that is 5 GHz. If the network
router does not support 5 GHz, the music
system is not able to connect wirelessly.
For more information, contact you retailer.
>> Network settings
Make a wireless connection See network information
You can see the settings made for your
network connection in the NETWORK
INFO menu.
> Use the pointer to highlight MODE on
your music system.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight NETWORK
INFO. You can now see a status on your
network setup.