Bang & Olufsen BeoSound 5 Encore - User Guide - Manual (Page 13)

13
Adjust sound settings
Store your preferred sound
settings. When you store a
sound setting, your system starts
playing at this level every time
you switch it on.
Sound settings are preset from
the factory to neutral values
which suit most listening
situations.
Adjust volume, bass or treble
You can preset levels for sound volume,
bass, treble and balance.
The loudness feature compensates for
the human ear’s lack of sensitivity to
high and low frequencies. These
frequencies are boosted at low volume
levels so that low music becomes more
dynamic.
Make sound settings …
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight SOUND.
> Turn the wheel to select the sound
element you wish to adjust; VOLUME,
BALANCE, BASS, TREBLE or LOUDNESS
and press GO. The current value is the
‘wheel focus’ upon entry.
> Turn the wheel to adjust the sound
setting and press GO to store the setting
permanently, or …
> … press to store the setting temporarily.
While adjusting sound, the speakers react
according to the adjustment.
Volume 0 mutes the sound. It is not possible
to store volume level 0 or volume levels
above 75.
VOLUME
BALANCE
BASS
TREBLE
LOUDNESS