Bang & Olufsen BeoSound 3200 - User Guide - Manual (Page 26)

26
When your music system is
connected to your video system via
the Master Link cable as described in
the chapter Audio/Video setup on
page 31, you can choose whether to
use the speakers connected to the
music system, if any, or the speakers
connected to the video system.
When your music system is connected to a
video system and the speakers are
connected to the video system, the video
system takes over some of the functions
mentioned in this guide, for example
programming a Timer as described in the
chapter Start or stop at a specific time on
page 24. Also all remote control operations
(audio and video) must be directed to the
video system.
If your speakers are connected to your
music system, your audio and video
systems do not have to be placed in the
same room, you can still listen to sound
from either system on the speakers of
either system.
Use an Audio/Video system
Play audio or video sound on either
system…
To listen to sound from your video system on
your music system speakers without switching
on the television screen…
Press repeatedly until AV* is
shown in the Beo4 display…
Then press a video source button
such as TV
If you press a source button before as well as after
AV has been shown in the Beo4 display, the
television screen will be switched on.
To listen to sound from your music system on
the television speakers…
Press repeatedly until AV is
shown in the Beo4 display…
Then press an audio source
button, such as RADIO
LIST
AV
TV
LIST
AV
RADIO
*NOTE! If AV is not available in the Beo4
display, you must add it to the Beo4 list of
functions, refer to the chapter Customise Beo4
on page 40 for further information.
An Audio/Video system. Speakers connected to
the video system.
An Audio/Video system set up in one room.
Speakers connected to the audio system.
An Audio/Video system set up in two rooms.
Speakers connected to the audio system – or to
both systems.