Bang & Olufsen BeoSound 3200 - User Guide - Manual (Page 20)

20
To distinguish between your CDs,
both physical CDs and the ones
stored in the CD memory, you can
name them. You can also name the
radio stations and the CD memory
groups.
When naming a CD or radio station, the
CD or radio station you are naming must
be playing. You can store a total of 200 CD
names in your music system, however, all
CDs stored in the CD memory can be
named. Each name may contain up to 8
characters, including numbers.
If you do not name a radio station, a
name, transmitted by the broadcaster, may
be shown in the display.
You can call up a list of the CD names
stored in your music system (not the ones
assigned to CDs in the CD memory) and
delete names in the list if you wish. If you
delete the name of a CD you have edited,
the edited series for this CD is deleted with
the name.
Naming
CD MEM
0 – 9
RADIO
0 – 9
CD
NAME
A _ _ _ _ _ _
▲
▼
tt
D _ _ _ _ _ _
GO
STORE ?
GO
STORED
See the list of CD names
While any CD is playing press
twice to see the CD names.
MEMORY appears briefly, then
the name of the current CD
flashes. If it has no name, the
disc number, e.g. DISC 1,
appears
Press to list the names one by
one
Delete CD name…
Press to delete a name and series
of tracks while the appropriate
name is displayed. DELETE ?
appears
Press again to delete name and
series of tracks.
DELETED appears, indicating that
the name and series of tracks are
deleted
Press CD to exit the CD naming
function
If the CD name list is empty,
EMPTY will appear in the display
If the CD name list is full,
FULL will appear in the display
NAME
NAME
MEMORY
DISC 1
▲
▼
DELETE
DELETE ?
DELETE
DELETED
CD
EMPTY
FULL
Use the naming function
First choose what you wish to name…
Select the group you wish to
name, and/or…
Press to switch on the CD
memory
Select the CD in the CD memory
you wish to name, or…
Press to switch on the radio
Select the radio stations you wish
to name, or…
Press to name a loaded CD
While listening to what you wish to name…
Press to start naming
Press to switch between
characters
Press to move to the next
character position – continue to
enter the whole name
Press to be able to store the
name. STORE ? appears
Press again to store the name*.
STORED appears indicating that
the name is stored
*If you press DELETE instead of GO, only the name
is deleted, all other settings remain.