Bang & Olufsen BeoSound 3200 - User Guide - Manual (Page 18)

18
Press to play the loaded CD
Press to start copying the CD
The display indicates to copy all
tracks
Press to copy the entire CD
Press to choose which group to
store your CD in – green, yellow,
red or blue
The first available position in the
chosen group is suggested, but
you can choose another
position
Press to step between available
positions, or…
Key in the number of the
position you want , or…
Press to start copying
If the CD is copy protected, the
display will indicate this shortly
When the copying of a coded
CD is complete, CODED is
displayed, and you must confirm
that you wish to store the copy*
➾ …
CD
COPY
ALL ?
GO
COPY TO ?
17 ?
▲
▼
0 – 9
GO
COPYING
CODED CD
CODED
GO
… ➾
Once the CD is copied and
stored, COPY OK appears in the
display
COPY OK
The easiest way to copy music into
the CD memory is to copy the entire
CD. Just load the CD and start
copying. The duration of the copying
depends on the length of the CD.
The quality of the music in the CD
memory corresponds to the quality of
the original CD. The CD can be heard
during copying but you can also
choose to mute the speakers while
copying.
Copy protected CDs can still be
copied to the memory of your own
music system. However, if the CD
you have copied is copy protected,
you must confirm that you wish to
store the copy. Otherwise it is
automatically deleted when the
system switches to standby
approximately 30 minutes after
finishing the copying.
Copy protection information may be
placed anywhere on the CD. Therefore,
this information may appear at any time
when you copy such a CD. When this
information is detected by your music
system, CODED CD appears in the display
but the music system continues copying
the CD.
If the memory group you choose is full
when you want to copy a CD into it, the
display reads FULL. You have to delete a
CD before copying a new one into the
group.
To stop copying…
Press to stop – the entire copy is
then deleted
*If you choose not to store the copy of a copy
protected CD, press STOP to delete the copy.
CD MEM
STOP
NOTE! If you do not specify a position, the CD is
placed on the first available position within the
selected group.
Copy and store a CD
Copy and store an entire CD