Bang & Olufsen BeoVision Avant CTV (1995-2005) - User Guide - Manual (Page 37)

37
Switching on and using extra
equipment…
• To switch on a video tape recorder number
2, press LIST to display V.TAPE2* on Beo4,
then press GO.
• To switch on a DVD/CDV player press DVD
on Beo4.
• To activate the other auxiliary equipment,
press LIST to display V.AUX*, then press GO.
*Note: In order to display V.TAPE2 and V.AUX
on Beo4, you must add the functions to the
Beo4 list of functions, See Extra functions in
Beo4, page 49 for further instructions.
The Sources menu for the V.Tape socket gives you
the following options to register the extra
equipment you may have connected to the V.Tape
socket, select…
V.Tape…for a Bang & Olufsen video tape
recorder
Set-top box*…for a set-top box
None…if nothing is connected
Equipment connected to the AV socket, select…
DVD…for a DVD or CDV player
Set-top box*…for a set-top box
V.AUX…for other auxiliary equipment
Non B&O V.Tape2…for a non-Bang & Olufsen
video tape recorder
V.Tape2…for a Bang & Olufsen video tape
recorder
S-VHS V.Tape2…for a Super-VHS video tape
recorder
Decoder-2…for a second decoder
Special decoder…for a special decoder
None…if nothing is connected
Equipment connected to the Decoder socket,
select…
Auto…if you have connected other equipment,
e.g. a decoder
Set-top box*…for a set-top box
None…if nothing is connected
V.Tape AV Decoder
V.Tape DVD Auto
Note: Please refer to the setting-up guide
supplied with your BeoVision Avant for further
information on connecting extra video
equipment.
*Note: The option ‘Set-top box’ only appears if
a Set-top Box Controller is built into your
BeoVision Avant.
Set-top box can only be selected for one socket.
If a Satellite module is built into your BeoVision
Avant, you cannot select both V.AUX and Set-top
box. Please refer to the User’s guide supplied with
your Set-top Box Controller for further
information.