Autocue QMaster and WinCue Pro News AP ENPS - Manual (Page 19)

WinCue Pro News AP ENPS User Guide AP ENPS Scripts in WinCue
••••
19
Note: Deleting old ENPS Runorders from the WinCuePro computer does not in
anyway affect ENPS; it purely deletes files off of the actual WinCuePro computer.
Ensure that the ENPS machine is not currently 'dumping' to the ENPS Runorder that
you want to delete, i.e. the Runorder on the ENPS terminal must be closed or the
'Dump to WinCuePro' for the Runorder is not enabled.
Close all open Runorders on WinCue so that the Queue Browser is displayed.
Click on the Runorder that you want to delete and then click on the delete
Runorder icon:
You will then be requested to confirm that you are sure you want to delete the
selected ENPS Runorder and then the ENPS Runorder will then be deleted from the
WinCue machine.
3.2 Panic Mode
WinCuePro has a Panic Mode option that allows ENPS Runorders and stories to be
manipulated from WinCuePro if the ENPS system stops working for any reason such
as a network failure.
IMPORTANT: The 'Panic Mode' feature should only be used as a last resort.
If Panic Mode is enabled the WinCue machine will stop trying to receive updates
from ENPS, as soon as Panic Mode is disabled the WinCue machine will re-start
trying to receive updates from ENPS.
Note: Any changes to the Runorder and stories on WinCuePro while in 'Panic Mode'
will be lost as soon as 'Panic Mode' is disabled