Attach pro plate to a tripod – Autocue MSP17 Master Series Prompter User Manual
Page 17
www.qtv.com
13
www.autocue.com
Issue
#
: 081
016
©
2003
-200
8
Au
to
cu
e Grou
p Ltd
Section 4: Assembly Procedures
Pro Plate preparation
Attach Pro Plate to a tripod
MSP17
Assembly and Installation
Guide
4.3.1: Attach Pro Plate to a tripod
1. Place the Pro Plate on a flat surface with the mounting slide uppermost.
2. Place the tripod camera mounting plate on to the Pro Plate mounting
slide.
3. Fix the camera mounting plate in place by screwing it to the Pro Plate
mounting slide.
N
OTE
:
Camera mounts vary, but must be only attached using the
large or small threaded holes in the Pro Plate mounting slide.
4. Fix the combined Pro Plate and camera mounting plate to your tripod.
5. With you camera attached to the Pro Plate camera carriage, you can
adjust the position by loosening the camera carriage locking lever and
moving the camera carriage forwards or backwards to find the balance
point.