Autocue MSP17 Master Series Prompter - Manual (Page 16)

www.qtv.com 12 www.autocue.com
Issue
#
: 081
016
©
2003
-200
8
Au
to
cu
e Grou
p Ltd
Section 4: Assembly Procedures
Pro Plate preparation
Adjust spacing and location of the mounting bars
MSP17
Assembly and Installation
Guide
4.3: Pro Plate preparation
The Autocue Pro Plate is provided disassembled as illustrated below.
The Pro Plate consists of a combined tripod slide and camera carriage, adjustable
mounting rods for attaching an on-camera unit and optional pan-tilt arm.
A Pro Plate can be attached to either a tripod or to a hand-held shoulder grip.
10.Adjust the length of the mounting rods.
This length will vary depending on the type of camera you are using, the
size of on-camera unit and whether the Pro Plate will be attached to a
tripod or shoulder mount.
11.Loosen the locking levers on the camera carriage.
12.Adjust the position of the mounting rod and then use the locking lever to
secure the rod in position.
13.Repeat for the other mounting rod.