Autocue MSP08 Master Series Prompter - Manual (Page 20)

MSP08 Assembly and Installation Guide
www.qtv.com 15 www.autocue.com
Issue
#
: 081
016
©
2003
-200
8
Au
to
cu
e Grou
p Ltd
S
ECTION
6:
MSP08 Operation
OSD (On Screen Display) menus are used to configure the prompter display unit
and prepare it for displaying scripts.
N OTE : While operating prompter display units, troubleshooting or
maintenance tasks may need to be performed on the prompter
display unit. For guidance, refer to section 1.
6.1: Connections
Once your MSP08 and camera combination are securely mounted on a tripod or
shoulder grip, attach the MSP08 cabling.
1. Ensure you have a power supply and video signal available
6.2: OSD controls
The OSD controls are used to make changes to parameters, perform scaling
adjustments and amend other operational settings of your MSP08.
6.2.1: Accessing the OSD controls
The Menu button on the side of the MSP08 opens the OSD controls. An example
OSD menu screen is shown below.
N OTE : If no adjustment is made to a control, the OSD will switch off
after approximately ten seconds.