Getting started, Prepare and connect the prompting hardware – Autocue SSP-i User Manual

Page 4

SSP-iUserManual.docx 2011-06-14

Getting started

This section is designed to get your Starter Series Prompter setup as quickly as possible so that you can start

writing and prompting your scripts.

Components of the SSPi

Prepare and connect the prompting hardware

1. Unpack your SSPi and check that the following items

have been received:

a. Starter Series Prompter (SSPi) (one only)
b. Custom carry case

2. Remove unit from its case and carefully place the

glass/hood, face down, onto a smooth clean level

surface.

3. Loosen the thumbscrews holding the monitor assembly and raise the iPhone

Adaptor.

4. Align the metal tongue of the monitor mounting plate with the slot in the drop

bracket and carefully insert the tongue into the slot.

5. Tighten the thumbscrews to secure the monitor assembly.

Hood and glass

iPhone Adaptor

(iPhone not supplied)

Hood mounting

bracket
Camera mounting

bracket
Slider plate
Drop bracket
Monitor mounting

plate