Buffalo Technology WZR-G300N - Manual (Page 75)

75
Most problems with setting up WDS are caused by incorrectly entering the MAC
addresses into each AirStation’s Web-Based Confi guration Utility. If you’re having
problems, check the MAC address settings in both AirStations’s Web-Based Confi guration
Utilities. Each Airstation should be confi gured to be in a bridge with the other’s wireless
MAC address.
Confi rm that all bridges are set to the same wireless channel.
Check the Packet Log (Advanced/Diagnostic/Packet Info) in each AirStation’s Web-
Based Confi guration Utility to confi rm communication between them (screenshot to
right). The “WDS” entries should show packets both
sent and received. In this example, the packet log
shows packets sent but not received, so the next
troubleshooting step would be to check the other
AirStation’s settings and packet log for more clues.
If you cannot access the AirStations wirelessly,
reconnect the Ethernet cables as shown on page
66 to easily access the AirStations’s Web-Based
Confi guration Utilities.
Troubleshooting WDS