Buffalo Technology WZR-G300N - Manual (Page 41)

41
The SSID is the name of your wireless
network. This is what you’ll see
when performing a wireless scan or
survey from a wireless client. You
may change this to something easy to
remember, like “MYNETWORK”.
Channel Selection - You may fi nd it
necessary to change the AirStation’s
channel to avoid interference with
other 2.4 Ghz sources, such as
cordless phones, neighboring Wi-Fi
networks, baby monitors, etc. By
default, the Auto Channel mode will
attempt to locate the clearest channel
possible.
Channel Bonding modes are specifi c for Draft-N. The 20 MHz mode uses less
available wireless bandwith, which results in less interference to other 2.4 GHz
wireless devices as well as slower wireless transfer speeds. The 40 MHz mode
uses more bandwith, resulting in potentially more interference but signifi cantly
more performance. Control Sideband instructs the AirStation to use channels
towards the lower end of the spectrum or the higher end.
802.11g (Basic)