beautypg.com

Connecting to a preexisting network – Buffalo Technology WZR-G300N User Manual

Page 58

background image

58

Connecting to a Preexisting Network

Add an AirStation without changing your existing LAN confi guration

1. Set the AirStation into Access Point Mode by moving the switch on the bottom from

AUTO to BRI.

2. Connect one of the AirStation’s LAN ports to an existing router or switch on your

network. Nothing should be plugged into the WAN port.

3. Open LAN Settings - LAN Port Settings and confi gure the following settings:
IP Address =[192.168.11.1] (Specify an unused network address from the existing

LAN.)

Subnet Mask=[255.255.255.0] (Use the same Subnet Mask as the existing LAN.)
DHCP Server Function=[Disable]
4. Restart PC.

See also other documents in the category Buffalo Technology Hardware: