Buffalo Technology WZR-G300N - Manual (Page 62)

62
Common Problems
• Out of range, client cannot connect to the AirStation.
• Confi guration mismatch, client cannot connect to the AirStation.
• Absence or confl ict with the Client Driver.
• Confl ict of another device with the AirStation hardware.
LED Activity
Monitoring LED activity helps identify problems.
• Power LED should be Green,
• Wireless LED should be Green if the line is active. If is it blinking Green, wireless
communication is active.
• Ethernet LED should be Green (100Mbps) or Amber (10Mbps) while the communication
is active.
• The Red Diag LED will fl ash during boot and fi rmware updates.
DIAG LED Activity
Unplug the power for three seconds. Plug the power back in to monitor the Diag LEDs
during start-up.
Troubleshooting