Confi guring a wds bridge – Buffalo Technology WZR-G300N User Manual

Page 66

Text mode
Original mode

Connect a PC’s Ethernet port to another RJ-45 port on the main router (the fi rst
AirStation). You will use this PC to confi gure the settings of the AirStations.

Here’s the whole setup, ready for initial confi guration.

Note: Each AirStation may be part of 6 different bridges. Remember that each layer

of bridges takes about half your total network speed, so avoid confi guring daisy-chains
more than 4 bridges long. A star-pattern is always better, with a central router serving
multiple bridges.

Confi guring a WDS Bridge