3D Robotics IRIS - Manual (Page 5)

03
Parts
RC transmitter
Your direct link to IRIS
3DR Radio
With micro-USB and Android OTG
ground station adapters
Slide out the leg to remove it, and replace with the new
leg. Replace the set screw and fasten until it sits flush with
the surface. Do not tighten the screw beyond this point.
Use the small (1.5 mm) hex
key to remove the set screw
in the bottom of the leg.
Battery kit
Power pack, charger, and guard bag
Tool kit
Wrench and small, medium, and large hex keys
(1.5 mm, 2 mm, and 3 mm)
Red legs
For extra visibility (optional)