beautypg.com

Maintenance, Cleaning still – Yamato Scientific WG221S Water Purifiers User Manual

Page 45

background image

-43-

Maintenance

Cleaning Still

Installation of the boiler

2. Connect the four heater terminals with the terminal rack.

3. Install the left side board on the unit.
4. Insert the tube into supply and drain for boiler and fix it by hose band.

Installation of the Condenser

1. Insert the packing into the joint with boiler and condenser, and fix boiler and condenser in the same

direction by metal fittings connection.

2. Connect the each hose to entrance of cooling water, exit of cooling water, and exit of distilled water.
3. Close the valve to drain boiler water.

This manual is related to the following products: