Run menu – Yamato Scientific WG221S Water Purifiers User Manual
Page 33
-31-
Run Menu
Collection of The Fixed Volume of Ion Exchanged Water
1. Push the switch to change the method to collect water. Then the CON. lamp goes out.
Among the operation panel indicators;
● The CON. lamp, a collection method indicator, goes
out.
● The indicator (2) shows the initial value of
. ( ),
a unit of collection, blinks.
2. Push either
▲
▲
▲
▲ or ▼
▼
▼
▼ key to set the volume to take.
Among the operation panel indicators;
●The indicator (2) changes the value according to your
key touch.
(You can set up to 99.9 .)
3. Push the ION EXCHANGED WATER switch.
Ion exchanged water comes out from the outlet
Among the operation panel displays;
●The lamp indicating collection of ion exchange water is
lit.
●The indicator (2) starts decreasing the displayed value.
4. When the indicator (2) decreases the displayed value to
and the remaining
water flow of 0.1 is completed;
Among the operation panel indicators;
● The lamp indicating the collection of ion exchanged
water goes out.
● The indicator (2) returns to the set value.
(The actual amount of collected water may increase or
decrease between maximum
±10％)