Yamato Scientific RE400 Evaporators, Rotary - Manual (Page 7)

5
How to Assemble
1. Unpack the package and take out the components.
Unpack the package and set the stand of the body on the stable place. If you don’t set the unit on the
stable place, vibration or noise occurs, or the unit could fall and get damages.
2. Fix the motor to the body.
1. Insert the motor bearing bar into the metal support of the body, put D cut surface (flat surface) of
the bar perpendicularly to either 2 upper pr side screws, and fasten 4 fix screws tightly by using
the attached hexagonal wrench (for M5).
Then, slant the motor slightly to the right (about 45 °), and fix the finger screw of the motor.
＊ ＊ ＊ ＊If you fasten loose, vibration occurs and prevents accurate measurement, or the motor
comes off and the glass apparatus could break.
2. Remove the cooling tube fastening knot (the bigger knot with a inner spring) when you fix the
motor.
Finger Screw