Brother MFC-7225N - Manual (Page 25)

Front Panel Setup
3 - 8
3
Restoring the network settings to factory default
If you wish to reset the print/scan server back to its default factory settings (resetting all information such as
the password and IP address information), please follow these steps:
1
Make sure the machine is not operating, then disconnect all the cables from the machine (except power
cable).
2
Press Menu/Set, 5, 0.
3
Press 1 to select Reset .
4
Press 1 to select Yes .
5
The machine will re-start, re-connect cables once this is complete.