Bushnell ONIX 110 - Manual (Page 50)

50
as a waypoint. You are prompted to specify the file in which you want
to save the waypoints. Click Open to use an existing file or New to open
a new file, specify the location to save the waypoint file and click Save.
A new waypoint screen appears. Enter information such as the name
of the waypoint and comments for the
waypoint. If required, edit the latitude
and longitude of the waypoint to get an
accurate location.
• Waypoints List – Displays a list of
all the waypoints. Select a waypoint and
click Go To to view the location of the
waypoint on the map. Click Edit to modify the
waypoint.
• Routes – Enables you to create and edit
routes using waypoints. If no waypoints
have been created, this option will not be
available. Create a route as follows:
i. Click New under Route to create a new
route. Modify the route name if desired in
the Name field.
ii. Select a waypoint from the waypoint
list and click Add to add it to the route.
Repeat as required.
iii. Click Set Navi to create the route and display it on the map.
• Geocaching – Click to create or open a geocaching file. You are
Tools Menu (cont.)