Bushnell ONIX 110 - Manual (Page 19)

19
Setting the Home Location
To set your Home Location:
1. In Simple mode, press the Menu button to
display the menu options.
2. Use the navigation keys to select Set Home and
press OK (Fig. 11).
3. You can set your home location with one of the
following ways (Fig. 12):
• Press the navigation keys to highlight Edit
Home and press OK. Use the navigation keys to
set the home position manually.
• Select Save as Home by pressing the navigation
keys. Your home location is automatically set to
the location acquired from the GPS.
4. Use the navigation keys to highlight √ to save
your settings. When a new home location is
set, the previous log will be deleted. A warning
message prompts you to confirm the new setting
Using the Navigation Feature
After setting your home location, you can start
navigation and recording trail logs. The navigation
log is recorded every 50 meters.
To turn on the Navigation function:
1. In Simple mode, press the Menu button to
display the OSD menu.
2. Use the navigation keys to select Navigation.
(Fig. 13)
The device will stop recording log and a
tracking line will be displayed on the screen.
3. The arrow pointing to the direction which
leads to your home location. It also displays the
time and distance before you reach your home
location.
4. Press the Page button to go to the Navigation
page. A route between the home location and
your current location is displayed. You can refer to
the route to go back to your home position.
Fig. 11
Fig. 12
Fig. 13