Bushnell ONIX 110 - Manual (Page 26)

26
• Select Clear Trail to clear the current trail points
(Fig. 35) .
• Select Save Trail to save the current trail log to
the system’s internal flash memory. Up to 8 trail
logs can be saved.
• Select Trail Distance to calculate the distance
from the start point to the end point.
• Select Trail Area to calculate the trail area from
the start point to the end point.
• Select Delete to delete the selected trail log.
• Select Show ON to display the trail log.
6. Under the Type tab (Fig. 36) , follow the steps
below to select the tracking method using distance
or time intervals:
• Highlight the Dist Interval field and press OK
to view the options. Use the navigation keys to
select the distance interval and press OK to save
your settings. Select the ----- option if you do not
wish to specify the distance interval.
• Highlight the Time Interval field and press OK
view the options. Use the navigation key to
select the time interval and press OK to save
your settings. Select the ----- option if you do not
wish to specify the time interval.
7. Use the down navigation key to highlight the
√ option and press OK to save changes.
NOTE:
• If you select a value for both the distance interval
and time interval, a trail point is recorded when either
of the interval value is reached.
• To ensure the integrity of data structure, the trail
log cannot be saved into non-volatile memory when
battery is low.
• When saving trail logs, select the Continue option
Creating a Trail Log (cont.)
Fig. 36
Fig. 35