Bushnell ONIX 110 - Manual (Page 32)

32
Viewing the Geocaching Page
After setting up the cache box, you can start the
treasure hunt by using the coordinates on the
geocaching page.
Follow the steps below to access to the cache boxes
location on your map page:
1. On the map page, press the Menu button to
display the menu options.
2. Select the box location you want to view, and
press OK to confirm
(Fig. 52) .
3. A warning message prompts to start recording
trail log. Press OK to proceed.
4. The map page will switch to the compass page
showing the direction, distance and time from
your current position to the chosen cache box
(Fig.
53) . The white arrow shows the direction of your
final destination, while the black arrow show the
direction you are traveling.
5. You can pause or stop recording the trail log
during the treasure hunting. Press the Menu button
to display the menu options.
• If you choose Stop Cache 2 (Fig. 54) , the trail
log recording will stop and a guiding line will be
deleted.
• If you choose Log Pause, the recorded guiding
line will be deleted. Press the Menu button again
and select Log Continue to resume recording
the trail log.
Using Sports Mode
The ONIX 110 features a sports mode which allows
users to set up a training session and record their
performance for post exercise evaluation.
Training Setup
The Training Setup menu enables you to set up the
Fig. 52
Fig. 53
Fig. 54