Bushnell ONIX 110 - Manual (Page 40)

40
7. Use the up/down navigation keys to highlight √
and press OK.
Setting the Display Units
Units can be set to either metric (KM/KPH), or
traditional (Mi/MPH).
To set the Units option:
1. Press the Menu button twice to display the main
menu.
2. Select Sys. Settings and press OK.
3. Select the Set 2 tab using the left/right navigation
keys.
4. Use the up/down navigation keys to highlight
the Units option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select a
setting
(Fig. 75) .
7. Use the up/down navigation keys to highlight √
and press OK.
Setting the DMS Format
DMS format defines how Degrees, Minutes, and
Seconds are displayed. You can either set the ONIX 110
to display degrees followed by minutes and fractions
of a minute, or you can set it to display degrees and
minutes followed by seconds and fractions of a
second.
To set the DMS format:
1. Press the Menu button twice to display the main
menu.
2. Select User Settings and press OK.
3. Select the Set 2 tab using the left/right navigation
keys.
4. Use the up/down navigation keys to highlight
the DMS Format option.
Fig. 75
Fig. 76
Changing the Map Direction (cont.)