Waring Pro ES1500 - Manual (Page 15)

15
1. Be sure the machine is unplugged and in the OFF position.
2. Remove the water tank and fill it to capacity with a mixture
of ¹/³ white vinegar and ²/³ water. Place the water tank back
into place.
3. Plug the machine in and turn it to the ON position.
4. Place a large container under the coupling seat. When
temperature is reached, the boiler temperature control light
(G) will turn on.
5. Pull the control lever (E) forward towards the coffee cup
symbol and let half of the solution run through the boiler
and into the container. Push the lever back to the standby
position to stop the solution from dispensing.
6. Push the control lever back to activate the steam function.
Place a container underneath the steam/water wand (Q)
and pull the steam/water dispensing lever (P) forward and
allow the remaining solution to run through the steam/
water wand (Q). When the solution is almost gone, push
the steam/water dispensing lever all the way back to stop
dispensing.
7. After decalcifying with the solution, clean the water tank
thoroughly and fill with cool, clean tap water. Let one cycle
of water run through the boiler by putting a container under
the coupling seat and pulling the control lever forward.
Any other servicing should be performed by an Authorized
Service Representative.