Vigo VG06041 - Manual (Page 8)

5
8
9
5
4
IMPORTANT
IN CASE THE THRESHOLD IS CUT TOO SHORT, USE THE THRESHOLD EXTENSION CLIP
(#14) TO EXTEND THE THRESHOLD ACCORDINGLY.
D. INSTALLING THE THRESHOLD
1. Place the threshold (#9) to the bottom door guide (#8). Note that the end of the threshold
should go half inside the bottom door guide and rest against the fixed panel #4) If the
threshold is too long, then cut it with the hacksaw until it fits the opening. [SEE FIG.11]
2. Remove the threshold. Apply silicone to the underside of the threshold. Place the threshold
back to its shower base location. Align the threshold and press firmly down.
3. Apply silicone to the threshold around the inside and outside of the shower base. Remove
any excess silicone from the threshold.
ROLLER HEIGHT
ADJUSTMENT SCREW
5
5 12
8
FIG. 7
MODEL VG06041
5
VIEW FROM TOP
INSIDE OF THE SHOWER
OUTSIDE OF
THE SHOWER
3 3
FIG. 8
FIG. 9
FIG. 10