UVP ChemiDoc-It TS2 Imagers - Manual (Page 7)

GelDoc-It
TS2
and ChemiDoc-It
TS2
Imagers 7
Thermal Printer
UV Lamp
UV/White Converter Plate
LED White Light Plate
Optional Equipment
UVP offers a variety of optional equipment to support the needs of varying laboratory environments. Refer to
“Replacement Parts and Accessories” at the end of this manual for optional equipment part numbers.
Thermal Printer
The thermal printer provides archive quality, 256 grayscale
prints and five optional cost-effective print sizes.
UV Handheld Lamps for Epi (Overhead) Lighting
A set of two 4-watt ultraviolet lamps can be connected inside
the darkroom to provide epi UV illumination. These lamps
can be switched on or off in the Lighting and Filters menu
within the TS2 Software and can also be removed from the
darkroom and used as standalone handheld lamps (as seen
in the image to the right).
LED White Light Plate
The LED White Light Plate emits high uniformity with less
than 5% coefficient of variance (CV). Plug the LED White
Light Plate directly into the power supply within the system
darkroom and select “White Light” under the Lighting and
Filters menu within the TS2 Software.
Converter Plates
An alternate to the LED White Light Plate, the UV/White
Converter Plate allows imaging of non-fluorescent stained
media with an ultraviolet transilluminator. The converter plate
is specially coated to convert 302nm UV output to white light
rather than using a separate white light box or plate.
The Visi-Blue™ Converter Plate (not shown) converts UV
to a safe 460-470nm wavelength designed for use with blue
excitation samples and SYBR Green, SYPRO Orange and
GFP stains.