UVP BioSpectrum Imaging System - Manual (Page 7)

BioSpectrum Imaging System 7
VisionWorks ® LS Software
VisionWorksLS software controls the darkroom functions and lighting as
well as the motorized lens and camera. The system may be configured
with VisionWorksLS analysis software for analysis of gels, plates, blots
and other samples.
BioLite Access Ports
Additional optional equipment can be added to the BioSpectrum Imaging
System through the side access ports.

Side access ports allow for connecting the external BioLite
MultiSpectral Light Source for directed lighting ranging from visible
to near IR (note: the Automated BioSpectrum has two access
ports while the Manual BioSpectrum has one access port).

The access panel on the back of the darkroom provides access for
connecting additional equipment within the darkroom.
Minimum Computer Requirements
Processor: Pentium 4, 1.6 GHz or higher
RAM: 2GB (4GB Preferred)
Display: 1024 x 768
Operating System: Microsoft Windows XP Service Pack 2 or Newer (32-bit or 64-bit)
Internet Browser: Microsoft Internet Explorer 6.0 or later
Computer USB Ports: Computer must come equipped with a minimum of three USB ports; additional
peripherals (mouse, keyboard, printer, etc.) may require additional USB ports.