Unisteer 8011530 Corvette Power Rack & Pinion Kit 1958-1962 - Manual (Page 6)

Page 6 656460
15. With all the wiring unplugged, remove the entire steering column/gearbox assembly. To remove
from the vehicle the column/gearbox must come out thru the engine side of the firewall.
16. Remove stock exhaust manifolds if replacing with Hooker Competition Headers.
Assembly:
1. Bolt Core support back together using supplied core support plate. (Note: you will only use enough
rubber spacers to allow the plate to be flat against the frame while still taking up the gap on the core
support.
2. Bolt body back to core support at all fastening points.
3. Install Headers or keep original exhaust manifolds. (Suggested Headers: Hooker Competition Series).
Part # 2456-1HKR (metallic ceramic) Part# 2546HKR (black)
Note: with Hooker Competition Headers it will be necessary to use a short oil filter.