Unisteer 8011530 Corvette Power Rack & Pinion Kit 1958-1962 - Manual (Page 3)

Page 3 656460
18 8026450 Black Inner Column Bracket 1
19 8050640
17mmDD x ¾”DD Polished Rack U-Joint
1
20 8050440 9/16”-30 x 9/16”-30 Polished Middle U-Joint 1
21 8050880
¾”DD x ¾”-36 Ididit Polished U-Joint
1
22 231730
3/8”-16 x 2½” Hex Bolt
4
22 200850 5/16” Zinc Flat Washer 8
22 207210 ¾” O.D. Rack Stand Off 4
22 120490
3/8”-16 Lock Nut
4
23 8021560 16mm Banjo 1
24 8021570 18mm Banjo 1
25 700420 Loctite 545 1
26 231050 10AN Hose Clamp & Collar 1
27 8026420 58-62 Vette Reservoir Mounting Bracket 1
28 232610 3/8”-16 x 1¼” Bolt 1
28 230810
3/8”-16 x 1” Bolt
2
28 200850 5/16” Flat Washer 2
28 205800 Pump Stand Off 2
29 8061210 Pump with bracket v-belt pulley and 16mm banjo 1
Disassembly
Note: Entire project is more accessible with the hood removed from the vehicle.
1. Drain coolant from radiator. Disconnect upper coolant line from both the radiator and the engine.
2. Remove the upper and side fan shrouds.