Buffalo Technology PC-P1LAN - Manual (Page 9)

9 Mini LinkTheater User’s Manual
Us
ing
Lin
kT
he
ate
r
Detailed Configuration
Appendix
1
Press the power button and
start LinkTheater.
2
Select [Settings], and press
button.
3
You can configure each of
these items.
• (Wired) Network settings
The following settings can be performed in
[Edit Profile].
Obtain automatically (DHCP): If there is a
DHCP server on the network, an IP address
is assigned automatically.
Manual settings: You can also manually
enter the IP address and subnet mask.
The settings are enabled by selecting the
items edited above in [Profile selection],
and pressing the [Select/Play] button on the
remote control.
• Display settings
In [Screensaver], you can set the amount of
time (1~60 minutes) before the screensaver
starts on the television screen when there
are no operations performed.
You can set the amount of time (3 seconds
— 2 minutes) that a photograph is displayed
on the television screen in [Photo display
interval].
• (Firmware) Version
This displayes the firmware version number.
Advanced Settings
Normally, you won't need to change these settings. Here's explanations of each in case you do.
* In order for you to distinguish between
explanations concerning the television screen
or computer screen, explanations about the
television screen are marked with this icon
.
* Screens shown in this manual are
examples. Your display may look slightly
different.
LinkTheater Advanced Settings
.