Buffalo Technology PC-P1LAN - Manual (Page 16)

16 Mini LinkTheater User’s Manual
Troubleshooting
I cannot switch the power on
Cause:
The power cord is disconnected from the wall
socket or LinkTheater
Solution:
Connect the power cord to the wall socket or
LinkTheater
I cannot see videos or hear sounds
Cause (1):
The connection to the television is incorrect
Solution (1):
Connect the television correctly
Cause (2):
The correct video input has not been selected
on the TV
Solution (2):
Select from inputs that are connected to
LinkTheater, for example “video”, etc.
Cause (3):
The LInkTheater or television mute function is
enabled
Solution (2):
Press the [Mute] button on the remote control
to disable the mute function. Refer to the
manual that came with your television for
details on how to disable the television’s mute
function.
Cause (4):
DirectX has a problem, or has been deleted
Solution (4):
Insert the CD provided into the computer's
CD drive, and select [Install DirectX] from
easy setup. Then follow subsequent onscreen
messages to install DirectX.
The remote control doesn’t work
Cause (1):
There are no batteries inside the remote
control
Solution (1):
Set batteries inside the remote control
Cause (2):
The batteries are exhausted
Solution (2):
Replace the old batteries with new ones
Cause (3):
The batteries are not inserted correctly
Solution (3):
Check the polarity of the batteries (+, -) and
insert them correctly
Cause (4):
The remote control is being pointed at the
television
Solution (4):
Point the remote control at LinkTheater to
operate it.
Cause (5):
There is an obstruction between the remote
control and LinkTheater
Solution (5):
Either move or avoid the obstruction.
Cause (6):
The remote control is too far away from
LinkTheater
Solution (6):
Move the remote control closer to LinkTheater
to operate it.
Cannot recognize the files inside
a registered folder
Cause (1):
The file names are written in 2 byte code
characters
Solution (1):
Files that have names written in 2 byte code
characters may not be displayed correctly.
Change the file names if they are not
displayed correctly.