beautypg.com

Buffalo Technology PC-P1LAN User Manual

Page 19

background image

19

Mini LinkTheater User’s Manual

Us

ing

Lin

kT

he

ate

r

Detailed Configuration

Appendix

Cause (7)

Files are copy protected

Solution (7):

DRM and copy protected files cannot be

played back on the LinkTheater. Play only

files that do not have DRM or copy protection.

Videos are not displayed correctly

Cause (1):

Videos are recorded in a television format

other than NTSC

Solution (1):

LinkTheater plays NTSC video. Record all

videos in NTSC format for playback on the

LinkTheater.

Cause (2):

LinkTheater is connected to your television

through a VCR

Solution (2):

LinkTheater is equipped with copy protection,

so playing back videos through a VCR may

cause the video to roll or become distorted.

Connect LinkTheater directly to an input on

your TV.

Sound skips/frames dropping occur

during playback

Cause (1):

Traffic on the network is not leaving enough

bandwidth for the LinkTheater to operate

Solution (1):

If another device is communicating on the

network while LinkTheater is playing back,

the network may become congested and

skipping or dropped frames may occur. If

skipping or dropped frames occur, finish other

network tasks, then play your video files.

Cause (2):

LinkTheater is connected to an 11Mbps

wireless network

Solution (2):

If LinkTheater is connected to an 11Mbps

wireless network, playing back files above

3Mbps may lead to skipping or dropped

frames.

Cause (3):

The type of file, definition, or encoding

conditions for playback are not suited to

LinkTheater

Solution (3):

skipping or dropped frames may occur with

some files. Play files that are supported by

LinkTheater (page 2).

Cause (4):

The bitrate exceeds 8Mbps

Solution (4):

Using the procedure on page 3 to convert

video files to MPEG-2 format with a bitrate

less than 8Mbps.

When watching on a television, the

edges (perimiter) of the video are cut

and the video appears distorted

Generally, televisions display with overscan,

which cuts a small amount of the video signal

periphery when displaying the video on the

screen. The amount of periphery cut differs

depending on the television, so the edges

(perimeter section) of the video may appear

ragged, or the video may appear either

vertically or horizontally distorted. Adjust this

in your TV's image settings.

Provided software is being blocked,

and LinkTheater cannot recognize the

computer (Windows XP)

After installing the provided software, the

[Continue to block this software?] message

may be displayed after restarting the

computer.

If this occurs, click [Remove block].

If you clicked [Check later]

Restart the provided software. [Continue to

block this program?] is displayed again. Click

[Remove block].