Installation, Wiring diagrams – Regency Liberty L390PB Medium Gas Insert User Manual
Page 24
24
L
390
PB-2 / HZI
390
PB-2 Direct Vent Gas Insert
INSTALLATION
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can
cause improper and dangerous operation.
Caution: Ensure that the wires do not touch any
hot surfaces and are away from sharp edges.
WIRING DIAGRAMS
This heater does not require a 120V A.C. supply for operation. In case of a power failure, the burner switch and the optional remote control/ thermostat
will continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.
WARNING:
Electrical Grounding Instructions
This appliance is equipped with a three pronged (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded
three-prong receptacle. Do not cut or remove the grounding prong from this plug.
Neutral
Live
Black
Black
Minimum Convection
Air Temp. Switch
Ground
ON
OFF
120V AC
Fan
White
Black