Regency Plateau PTO60 Outdoor Gas Burner - Manual (Page 23)

Regency Plateau™ PTO30 Outdoor Gas Fireplace
23
INSTALLATION
ASSEMBLY INSTRUCTIONS FOR A STEEL STUD
SEE THROUGH FRAMING KIT FOR PTO30
Follow these instructions to construct a steel stud see through frame for the PTO30 burner;
Overall dimensions =64-1/16" W x 51" H x 19" D .
**Non-combustible fi nishing board not supplied with kit. Board may be purchased at your local hardware/building supply store.
IMPORTANT: Supplied vents need to be installed into non-combustible fi nishing board, before applying fi nishing materials. Follow guidelines
included with these instructions.
377-908 CONTENTS:
Top / Bottom (A) x 2
Vertical Supports - Tall (B) x 8
Vertical Supports - Short (C) x 6
Base (D) x 1
Short Brace (E) x 4
Header (F) x 2
Vents 4
Wafer Screws 80
Tools Required
1 power
drill
+ #2 phillips bit
1 hand
#2 screwdriver
(Phillips)
1 level
1
tape
measure
See Through Framing Kit Video