Regency Plateau PTO60 Outdoor Gas Burner - Manual (Page 20)

20
Regency Plateau™ PTO30 Outdoor Gas Fireplace
INSTALLATION
OPTIONAL LOG SET INSTALLATION
Read the instructions below carefully and refer to the
images. If the logs are broken do not use the unit until
they are replaced.
Broken logs can interfere with pilot operation.
Improper positioning of the logs may create carbon build-up
and can alter the unit's performance which is not covered
under warranty.
Log kit # 326-930 contains the following pieces:
Description
Log A
Log B
Log C
Log D
Log E
Log F
Diagram 3
Diagram 2
Diagram 1
F
E
D
C
B
A
A
D
2) Install log D on the burner as shown below. Orient the log in the same way and in a similar location on the right side of the burner as shown
in Diagram 3.
1) Install log A as shown below. Orient the log in the same way and in a similar location on the right side of the burner as shown in Diagram 2.
3) Install log E on the burner as shown below. Orient log E across log D in the same way and in a similar position as shown in Diagram 4.
Diagram 4
E
D
NOTE: PTO60 requires 2 log sets.