beautypg.com

Installation – Regency Plateau PTO28CIT Outdoor Gas Firetable User Manual

Page 15

background image

Regency PTO28 City Table Outdoor Gas Fireplace

15

INSTALLATION

7. Remove LP tank and LP hose from valve.

9. Secure regulator in position with top bracket - secure with 2 screws.
NOTE: Top bracket to sit over top of lower bracket.
Attach supplied "MAX. 0.5 PSI" sticker to top bracket.

6. Remove panel (90º to the right of the ON/OFF switch). Lift panel up slightly

by handle and pull outwards. Place panel on a soft clean surface.

Remove this

panel

LP hose

Switch

Handle

Regulator

Flexline

Regulator

Bracket

Top

Bracket

8. Install regulator bracket onto unit base with 2 screws. Connect fl ex line to

regulator—position regulator onto bracket.

Diagram 6

Diagram 7

Location to install

regulator

Access for

Hard line

Diagram 8

Diagram 9

Diagram 10

10. Remove connector from end of fl ex line.

Remove

connector

Diagram 11