Regency Plateau PTO28CIT Outdoor Gas Firetable - Manual (Page 12)

12
Regency PTO28 City Table Outdoor Gas Fireplace
INSTALLATION
LP HARD LINE CONVERSION
(FOR USE IN PLACE OF LP TANK)
Each Kit contains one LP Hard Line Conversion Kit
Conversion Kit # 286-972 Contains:
Qty. Part
# Description
1 909-265 Max 0.5 psi label
1 286-035 Regulator mounting base
1 286-036 Regulator mounting top
1 910-054 Regulator LP
1 904-978 3/8” fl ex pipe 18” length
4 904-553 #8 Philips
1
919-229 Instruction sheet
2. Remove LP tank and LP hose from valve.
4. Secure regulator in position with top bracket - secure with 2 screws.
NOTE: Top bracket to sit over top of lower bracket.
Attach supplied "MAX. 0.5 PSI" sticker to top bracket.
1. Remove panel (90º to the right of the ON/OFF switch). Lift panel up slightly
by handle and pull outwards. Place panel on a soft, clean surface.
Remove this
panel
LP hose
Switch
Handle
Regulator
Regulator
Bracket
Top
Bracket
3. Install regulator bracket onto unit base with 2 screws. Connect fl ex line to
regulator—position regulator onto bracket.
Diagram 1
Diagram 2
Location to install
regulator
Access for
Hard line
Diagram 3
Diagram 4
Diagram 5
Turn off unit and allow to cool to room temperature.
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!