English | deutsch | français – Snakebyte Premium HDMI Selector User Manual
Page 8
SB903311_User_Manual#C3C55.FH11 28.06.2007 18:09 Uhr Page 5
Black
C
M
Y
CM
MY
CY CMY
K
English
| Deutsch | Français
6
Back:
1. HDMI inputs: Connect your signal sources here via HDMI cables.
2. S/P-DIF/Toslink inputs: Connect your signal sources here via optical cable for digital sound
reproduction (only necessary when the HDMI selector is used with DVI cables)
3. HDMI output: Connect your HDMI receiver (HDTV, Beamer, AV receiver) here using the included
HDMI cable.
4. S/P-DIF/Toslink output: Connect your amplifier or AV receiver here for reproduction of digital
sound
5. Power supply
Annotations for use with signal sources featuring DVI exclusively:
To operate DVI gear with the snakebyte HDMI Selector please use either a customary DVI/HDMI
adaptor (available in stores) in combination with standard HDMI cables, or DVI - HDMI cables. DVI
(Digital Video Interface) is basically compatible with HDMI – only basically because it does not transport
digital audio. Therefore, please use the corresponding optical ports of the HDMI Selector (applies to
signal sources as well as play back devices).
Infrared remote control
1. ON/OFF-Button
2. Channel +/ - Buttons (functionally identical with button no. 4 on the HDMI Selector)
3. Equalizer +/- Buttons (functionally identical with button no. 5 on the HDMI Selector)
4. Direct channel select buttons
5. Battery protector sheet (remove plastic sheet after purchase to activate the remote control)
Security advices for placement and connection
• Place the HDMI Selector onto a stable and even surface. Ideally close-by your play back device
countervailing long cable distances.
• Avoid contact with any liquids as this may lead to short-circuit and further damage. Keep the
HDMI Selector away from vases, open bottles, buckets, etc. – or vice versa.
• The same counts for burning objects such as candles, cigarettes, ashtrays, etc. Fire, heat and
wax may damage the Selector.
• Although the snakebyte HDMI Selector does not emit high operating temperatures, please make