Sensaphone IMS-4000 Upgrade instructions User Manual

Page 6

IMS-4000 Software Update Notice

IMS-4000 Embedded Firmware Feature and Correction Summary

IMS4k OS

Version 3.28 (April 10, 2013)

• Corrected an issue in which an unusually large value would appear the Max field when connecting

a new sensor.

• Corrected web page issue when displaying the data log for External Probe and Ultra-Low

Temperature sensors.

Version 3.27 (September 28, 2012)

• Decimal points now supported for editing inputs and templates on the web page.

Version 3.26 (September 25, 2012)

• Added a decimal point to values displayed on the web page.
• Fixed column formatting on the Alarm Summary part of the web page.

Version 3.25 (August 13, 2012)

• Corrected issue which caused occasional problems with call-in modem connections.

Version 3.24 (June 7, 2012)

• Updated time zone information to correct a daylight saving time issue in LaPaz.
• Fixed an issue on the Web Page involving the display of data log values for the External Probe

Temperature sensors .

Version 3.23 (May 22, 2012)

• Fixed an issue with the Phone LED so that it turns off after making a dial-in data connection.
• Fixed a data log and event log issue on the web page when using a 4-20mA wireless sensor with

custom table limits.

• Added support for wireless sensor low-battery messages in the event log on the web page.
• Added alphanumeric pager password support.
• Increased data log capacity on devices with flash disks larger than 16MB.

Version 3.22 (January 26, 2012)

• Removed snmp 161, snmp-trap 162, and irc 194 from IP Alarm port list on web page.
• Corrected problem where a 4-20mA transducer using custom table limits on a node would report a

current value of 0 in alarm message.

Version 3.21 (August 5, 2011)

• Changed WebFTP function to use passive mode.
• Added error checking to WebFTP function to prevent problems associated with the use of special

characters.

Version 3.20 (June 27, 2011)

• Changed the internal hostname to resolve some smtp issues.

Version 3.19 (January 12, 2011)

• Added support for Axis camera server model 240Q
• Improved SNMP MIB browsing so that next object is retrieved even if current OID is invalid.
• Fixed login problem which, under specific conditions, would cause usernames other than “admin”

to fail.

• Added two new modes for PowerGate Alarm Response which will initiate an outlet On or Off

response when the alarm occurs and reverse the action when the alarm returns to normal.