Sensaphone IMS-4000 Upgrade instructions - Manual (Page 13)

IMS-4000 Software Update Notice
13
VoiceWare
Version 2.13 (April 17, 2009)
• Added support for the IMS-4310 Dual Relay Output Module
Version 2.12 (May 12, 2008)
• Added voice support for new IMS–series sensors: Ultra–Low Temperature Sensor, 15A Current
Sensor, and 20A Current Sensor.
Version 2.10 (October 20, 2003)
• Added voice support for call-in acknowledgement feature.
Version 2.09 (June 13, 2002)
• Added Alarm on Return-to-Normal vocabulary.
Version 0.08 (May 21, 2002)
• General vocabulary improvements.
Version 0.06 (May 3, 2002)
• General vocabulary improvements.
Version 0.05 (May 1, 2002)
• Added PowerGate vocabulary.
Version 0.04 (March 21, 2002)
• Added vocabulary to support trouble alarms.
• Added vocabulary for menus.
Version 0.03 (February 20, 2002)
• First production version.
Node Firmware
10/100 Mbps model
Version 3.16 (April 17, 2009)
• Added support for the IMS-4310 Dual Relay Output Module
Version 3.15 (December 5, 2008)
• Maintenance update
Version 3.14 (October 15, 2008)
• Corrected an issue that would occur when a sensor becomes disconnected from the node.
Version 3.13 (February 1, 2007)
• Corrected issue which caused the serial port to stop responding if the network parameters were
configured incorrectly.
Version 3.13 (October 1, 2006)
• Removed system messages displayed on serial port during reboot.
Version 3.11 (April 1, 2006)
• Corrected IP Alarm issue when the device status changes from Route Down to Ping Timeout.