Schwank 4N/L62-J Pole Mounted - Manual (Page 7)

GP-M45J-CX-03D
4N/L51-J,4N/L62-J Manual
RD: Aug 2006
RL: 3D
KH
4. MAIN COMPONENTS AND TOOLS REQUIRED FOR ASSEMBLY
Tools Needed: (not supplied)
Adjustable Wrench, Slip Joint Pliers, Phillips Screwdriver-Medium Blade (#2 or #3 blade), Hammer, 3/8” Masonry
Drill Bit (if mounting on concrete patio), Teflon Plumbing Tape for Joints, Spray Bottle of Soapy Water or Paint Brush and
soapy water (to check leaks)
Parts Supplied:
Models 4N/L51, 44N/L5 include stainless post and base.
Models 4N/L62, 44N/L6 include black powder coated post
and base.
All other components are common for Models
4N/L51, 44N/L5 & 4N/L62, 44N/L6 .
Page 4
•
Main Burner / Head Assembly Unit
•
66” Flexible Gas Hose with brass fittings.
•
32” Aluminum Reflector (5 Piece).
•
2 3/8” x 61” Pole.
•
2 3/8” x 5 1/2” (c/w 8” Flange) Floor Mount Adapter.
•
2 3/8” x 12 3/4” Concrete Embedded Adapter.
•
13” Diameter Domed Base Cover.
•
4 - 3/8” Concrete Lag Bolts.
•
4 -Phillips 10 mm Screws for Burner to post
•
6 -Phillips 10 mm Screws for Post to Floor Adapter.
•
3 - M8-125 Wing Nuts for Top Reflector.
•
6 -Washers for Top Reflector.
•
12 x 1/4” Acorn Nuts for Top Reflector Assembly.
•
12 x 1/4” Washers for Top Reflector Assembly.
•
1” x 7” Ribbed UV Protector for Hose
•
AAA Igniter battery.
Note: Gas Pressure Regulators are required (not supplied )
(see Connection and Testing)