Robustel M1000 MP User Guide - Manual (Page 3)

Robustel GoRugged M1000 MP User Guide
RT_UG_M1000 MP_v.1.0.0
20.12.2013 2 / 41
Important Notice
Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data
may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare
when wireless devices such as the modem are used in a normal manner with a well-constructed network, the
modem should not be used in situations where failure to transmit or receive data could result in damage of any kind
to the user or any other party, including but not limited to personal injury, death, or loss of property. Robustel
accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received
using the modem, or for failure of the modem to transmit or receive such data.
Safety Precautions
General
 The modem generates radio frequency (RF) power. When using the modem care must be taken on safety issues
related to RF interference as well as regulations of RF equipment.
 Do not use your modem in aircraft, hospitals, petrol stations or in places where using CELLULAR products is
prohibited.
 Be sure that the modem will not be interfering with nearby equipment. For example: pacemakers or medical
equipment. The antenna of the modem should be away from computers, office equipment, home appliance,
etc.
 An external antenna must be connected to the modem for proper operation. Only uses approved antenna with
the modem. Please contact authorized distributor on finding an approved antenna.
 Always keep the antenna with minimum safety distance of 26.6 cm or more from human body. Do not put the
antenna inside metallic box, containers, etc.
Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open.
Modem may be used at this time.
Using the modem in vehicle
 Check for any regulation or law authorizing the use of CELLULAR in vehicle in your country before installing the
modem.
 The driver or operator of any vehicle should not operate the modem while in control of a vehicle.
 Install the modem by qualified personnel. Consult your vehicle distributor for any possible interference of
electronic parts by the modem.
 The modem should be connected to the vehicle’s supply system by using a fuse-protected terminal in the
vehicle’s fuse box.
 Be careful when the modem is powered by the vehicle’s main battery. The battery may be drained after
extended period.
Protecting your modem
 To ensure error-free usage, please install and operate your modem with care. Do remember the follow:
 Do not expose the modem to extreme conditions such as high humidity / rain, high temperatures, direct
sunlight, caustic / harsh chemicals, dust, or water.
 Do not try to disassemble or modify the modem. There is no user serviceable part inside and the warranty
would be void.