Robustel M1000 MP User Guide - Manual (Page 21)

Robustel GoRugged M1000 MP User Guide
RT_UG_M1000 MP_v.1.0.0
20.12.2013 20 / 41
2. In the secureCRT window, type ATS0=x and press Enter. For x, substitute the number of rings that the modem
should receive before answering the call. For example, to answer after the first ring, type ATS0=1.
3. Type AT&W and press Enter.
4. To close the CSD connection, type +++. The modem will respond with OK to indicate that you have already
switched back to the command mode.
5. Type ATH and press Enter to disconnect.
3.3 Using Short Message Service
Cellular technology offers the benefit of using SMS (short message service) as an easy way to communicate over the
mobile network.