RaySafe i2 Dose Viewer - Manual (Page 14)

14
RaySafe i2 dose viewer user manual – Using dose viewer
Figure 6. Dosimeter options, settings tab
In the Settings tab you can:
• view and synchronize the dosimeter’s clock with the computer’s clock.
• Set real time display mode to show/hide, which makes the dosimeter to be shown/not shown on a real time
display.
• turn power mode on/off, which puts the dosimeter in operating or power saving mode. In operating mode,
communication with real time displays will take place and registration of dose data will occur. In power
saving mode no communication with real time displays will take place and no registration of dose data will
occur.
• Reset the dosimeter’s dose history – This will permanently delete the dosimeter’s entire dose data.
• view battery status and firmware version.
WARNING Make sure that the computer’s clock is correct, otherwise the dose history data will be shifted
in time and therefore not accurate anymore.
NOTE If you need to change the hour digit, the dose history will have to be reset. This is done
automatically; you just need to confirm the action. When you synchronize dosimeter’s time the