Purenex FLECK 5600SXT METER WATER SOFTENER SYSTEMS - Manual (Page 13)

- 13 -
FIGURE 36 FIGURE 37
• The display may now show “RR / 12” as shown in figure 38 below. (This
indicates Rapid Rinse Time is 10 minutes)
Do not change this value, and press
the “Extra Cycle Button” once to continue – if this value is different, use the
“UP” or “DOWN” buttons to change this
.
• The display may now show “BD / 10” as shown in figure 39 below. This indicates
the length of the Brine Refill Cycle during regeneration.
Use the table below to
determine the proper salt time setting based on the size of your system – if
this value is different, use the “UP” or “DOWN” buttons to change this
.
.
Change the value by pressing the “UP” or “DOWN” button until the proper
time setting is shown, and press the “Extra Cycle Button” once to continue
when finished.
FIGURE 38 FIGURE 39
System Size Salt Time Setting
24,000 Grains 7
32,000 Grains 10
40,000 Grains 12
48,000 Grains 15
64,000 Grains 19
80,000 Grains 23
96,000 Grains 29
120,000 Grains 39