MacDon 962 Harvest Header - Manual (Page 69)

69
UNLOADING & ASSEMBLY
INSTALL GAUGE WHEEL / TRANSPORT OPTION
30 & 36 FT. (continued)
13. Attach Slow Moving Vehicle Emblem at (G).
14. Store hitch on frame tube as follows:
a. Remove the following hardware, which is stored in caster clevis at end of hitch:
One 1/2 x 3-1/4 hex head bolt, two locknuts, one flatwasher and one hairpin.
Install this hardware at left endsheet as shown at (A).
b. Install hitch support onto bracket welded to frame tube at (B), using two 3/8 x 1 carriage bolts and flange
locknuts.
c. Place drawbar end of hitch over hardware at (A) and rest other end of hitch in support at (B).
G
ATTACH SMV SIGN
HITCH STORAGE – INBOARD END HITCH STORAGE - OUTBOARD END