Paxton PROXIMITY P50 compact kit - Manual (Page 5)

1 10,000
1 100
1 sec 60 secs
1 2
1 3
11V DC 14V DC
100mA
1A
-20 °C +55 °C
IPX7
80 mm 50 mm 35 mm
50 mm 100 mm 15 mm
Silent operation card
1. Take the silent operation card from the card box.
2. Present the card to the reader. The reader give a single beep.
3. The reader will now be silent when a token is presented.
4. To activate the beep again, present the silent operation card.
1 2 3 4
BEEP!
BEEP!
BEEP!
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Paxton Access
FUNCTION CARD
silent operation
Present this card to silence the beeping noises
made by the reader. Present this card again to
re-enable the beeping noises
Paxton A
ccess
FUNCTION
CARD
silent o
peration
Present
this c
ard to silenc
e t he b
eep ing no
ises
made by t
he r ea der . P resent
this card a
gain t
o
re-ena
ble t he b
eep ing no
ises
Paxton A
ccess
FUNCTION
CARD
silent o
peration
Present
this c
ard to sil
enc e t he b
eep ing no
ises
made by t
he r ea der . P resent t
his c ard a
ga in t o
re-ena
ble t he b
eep ing no
ises
Voltage
Specifications
Operating temperature
Electrical
Environment
Dimensions
Min Max
Width Height Depth
Current
Outdoor Use
Features
Door open time
Number of Card Packs
Time zones (with additional time clock)
Silent operation
Can be used with fail OPEN locks
Can be used with fail CLOSED locks
Exit button input
Waterproof
Number of Users
Access levels (Colour Zones)
Switchable current
Min
Min
Max
Max
Read Range Keyfob Token Watchprox
Yes
Yes
Yes
Yes
The declaration of conformity is available on request.
Contact details are provided at: http://paxton.info/596
Electrical shock from voltages used in this system can cause injury or death. Prior to making any electrical
connections, or performing maintenance and repair, ensure power is removed.
Mains electrical connections should be made only by qualified personel in accordance with local regulation.
1. Safety goggles should be worn while using power tools.
2. Before drilling the mounting holes, check the area for concealed wires and pipes.
3. The power supply provided is suitable for internal mounting only.
Important information